 |
 |
 |
 |
 |
Calibration Services
Gages, Standards, and Inspection Equipment
|
 |
Gagemaker provides full service calibration on all gages sold.
A standard long form certificate is provided with all calibrations, at no extra charge.
Gages produced and sold by other manufacturers are quoted on an individual basis.
The prices listed below are to be used as a guideline only. Many times repairs are necessary
to maintain gage calibration. All repairs are quoted and require customer authorization prior
to work being done. An evaluation charge of $75.00 will be required to quote any repairs.
MIC TRAC Calibration (All Models) |
MIC TRAC Model No. |
MIC TRAC Model Options |
|
MIC TRAC
Non-Force-Lok
Unit
|
MIC TRAC
Force-Lok Unit |
MIC TRAC
with Probe and
Digital Readout
|
|
TRAC-2012, MT-3012 |
255.00 |
310.00 |
N/A |
425.00 |
85.00 |
TRAC-2024, MT-3024 |
310.00 |
365.00 |
N/A |
492.00 |
85.00 |
TRAC-2036, MT-3036 |
365.00 |
421.00 |
N/A |
549.00 |
85.00 |
TRAC-2048, MT-3048 |
421.00 |
476.00 |
N/A |
721.00 |
85.00 |
TRAC-2060, MT-3060 |
476.00 |
588.00 |
N/A |
N/A |
85.00 |
MT-4012 |
|
425.00 |
525.00 |
85.00 |
MT-4024 |
492.00 |
572.00 |
85.00 |
MT-4036 |
549.00 |
649.00 |
85.00 |
MT-4048 |
N/A |
721.00 |
85.00 |
|
Note: Gagemaker cannot guarantee the accuracy of this unit unless it is correctly packaged and shipped in a proper carton. Request a Return Authorization Number and instructions, prior to shipping. Current cost for a replacement shipping container is $180.00. All MIC TRAC units are supplied with a calibration certificate and inch-by-inch error report, at no additional charge.
|
Gages and Other Inspection Equipment Calibration |
Model No. |
Services Available |
Calibration Price |
Repair Rate ($/hr) |
| Gage Calibration Equipment |
| TF-1F, TF-2R Setting Blocks |
Inspect flatness, parallelism, and size |
47.50 / set |
50.00 |
| TF-XXT Taper Blocks |
Inspect taper and size |
47.50 / set |
50.00 |
| TF-XXRSC Taper Block Set |
Inspect taper and size |
72.50 / set |
50.00 |
| TF-BX Setting Blocks |
Inspect angle and size |
47.50 / set |
50.00 |
| TF-TP Calibration Fixture |
Inspect and calculate new constant |
62.50 |
50.00 |
| CG-1001 Bench Calibrator Gage |
Verify micrometer travel |
72.50 |
50.00 |
| Thread Diameter Measurement Gages |
| RG-7000, PG-6000 Diameter Gages |
Verify function and check parallelism |
72.50 |
50.00 |
| Large Diameter Measurement Gages |
| MIC 360 Gage |
Verify wheel diameter and gage function |
229.00 |
50.00 |
| API Gages/Standards |
| Lead Gages |
Calibrate indicator and verify function |
31.00 |
50.00 |
| Lead Standards |
Inspect step/step per specification |
35.00 |
50.00 |
| MRP Gages |
Inspect compete assembly |
37.50 |
50.00 |
| MRP Standard Set |
Inspect rod lengths per specifications |
35.00 |
50.00 |
| Thread Height Standards |
Inspect groove depths per specifications |
25.00 |
50.00 |
| Profile Gages |
Verify profile with optical comparator |
25.00 |
N/A |
| Miscellaneous Equipment |
| Indicators |
Calibrate per specification |
31.00 |
50.00 |
| Thread Rolls |
Calibrate per specification |
47.50 / set |
50.00 |
| MM Contract Inspection |
Per customer specifications |
N/A |
125.00
|
|
|
| |
Calibration Certificates |
Certificate Type |
Price |
Standard Long Form Certificates – provided with all calibrations. Includes model number, serial number, required and actual measurements, traceability to NIST or other governing body, inspector’s signature, calibration and recalibration date. Profile gages are issued certificates of compliance only. |
No Charge |
Special Long Form Certificates – includes any documentation other than that listed under the Standard Long Form Certificate. |
30.00 |
|
| |
Prices subject to change without notice.
Effective 09/2005
|
|
 |
 |
|
