MT-3000 Optional Equipment Measurement Accessories Model No. Description PRN-100 Printer for hardcopy records of measurements PRN-000 Replacement roll of printer paper TF-1F Flat face setting blocks TF-SB Adjustable height support table TW-50 50 in-lb torque wrench with 5/32" hex wrench adapter CRC-MT3000 Laminated reference cards with step-by-step instructions for calibrating handheld gages using the MT-3000. TD-WIN Thread Disk for Windows software for calculating critical setting dimensions for threads. Includes UN Series, ACME, Stub ACME, ISO Metric and 7° x 45° Buttress thread forms. Thread Gage Setting Blocks (2 per set) Model No. Description TF-1V 1-5 pitch 60° "V" thread setting blocks TF-2V 6-20 pitch 60° "V" thread setting blocks TF-1A 2-3 pitch ACME / Stub ACME thread setting blocks TF-2A 4-20 pitch ACME / Stub ACME thread setting blocks Special Purpose Setting Blocks (2 per set) Model No. Description TF-BX 23° angle face setting blocks MT-4000 Optional Equipment Measurement Accessories Model No. Description TF-2R Carbide setting blocks - 3/8" TD-WIN Thread Disk for Windows software for calculating critical setting dimensions for threads. Includes UN Series, ACME, Stub ACME, ISO Metric and 7° x 45° Buttress thread forms. TF-XYT Adjustable height support table TW-50 50 in-lb torque wrench with 5/32" hex wrench adapter CRC -MT4000 Laminated reference cards with step-by-step instructions for calibrating handheld gages and ring & plug gages using the MT-4000. Ring & Plug Gage Calibration Accessories Model No. Description TF-CR Set of 3 fixtures for measuring cylindrical ring gages and bores. CR-1 (.170"-.230"), CR-2 (.250"-.875"), CR-3 (.880"-larger). TF-IT Internal threaded ring arm accessory for measuring pitch diameters. TF-TP Calibration fixture for NPT, NPTF and ANPT tapered plug gages (included wires for 27, 18, 14 and 11 1/2" pitch threaded plugs). (Requires TF-2R blocks) TF-WS Set of thread wire holder modules with wires for 6, 8, 10, 12, 14, 16, 18, 20, 24, 28 and 32 pitch "V" threads. (Requires TF-2R blocks) Thread Wire Holder Modules UN, ACME and Metric Threads (xx represents pitch) Model No. Description TF-WHV-xx 60° thread wire holder modules with wires for 1-48 and 56-72 pitch TF-WHA-xx 29° thread wire holder modules with wires 2-20 pitch TF-WHM-xx Metric thread wire holder modules with wires .5 mm - .8 mm, 1mm - 4.5 mm, 5 mm and 6 mm pitch TF-WH-xx Wire holder only